C and I System is a NABL Accredited Testing Laboratory.
Sample are tested here:
Bricks (IS 3425):
Compressive Strength, Water Absorption, Efflorence, Dimension, Bulk Density
PAVER BLOCK IS:15628):
Compressive Strength, Water Absorption
C.C. TILE IS:1237.10646):
Flexural Strength Water Absorption
BITUMEN &BITUMEN EMULSION IS: 1201 TO 1220):
Softening Point, Flash Point, Penetration Test, Ductility Test, Marshall Stability, Solubility in Trichloroethylene, Loss on Heating Elastic Recovery at 150C, Specific Gravity, Thin Film Oven Test.
Residue on 600 micron, Viscosity by Saybolt Furol Viscometer at 25 & 50 °C, Coagulation of Emulsion, Storage Stability, Coating Ability and Water Resistance, Miscibility with Water, Stability with Mixing with Cement, Tests on Residue
SOIL (IS: 2720):
Grain Size, L.L, PL., Water Content, Specific Gravity, Shrinkage Limit, Compaction test by (Light & Heavy Method), FSI, Swelling Pressure, CBR, Direct Shear, Consolidation, Permeability and CNS Mix Design
ROCK (IS: 9143, 13030):
Unconfined Compressive Strength, Relative Density, Water Content, Point Load Index
Soil at site :
Plate Load Test, Cyclic Plate Load Test.
Standard Penetration Test, Field CBR Test.
IN Situ Density:
1) Sand replacement 2) Core Cutter Method