M/s C and I Calibrations Pvt. Ltd, is a NABL Accredited Calibration and Testing Laboratory. The prime aim of this unit is to provide solution in managing calibration and Testing looking to the needs of the various industries in this region govt. organizations and private sectors.

  • J-448, Sitapura Industrial Area, Jaipur-302022 (Raj.) India
  • +918003095304 / 91-8003095302
  • infocicpl@gmail.com
  • Mon - Sat: 9:00 am - 6:00 pm

Volume calibration:

As it should be volume calibration depends continuously the first plus feast positions, like these two positions settle on the least possible along with ceiling volumes. The maximum arrange (the lowest amount position), fashionable which the needle is not pushed by all, is 0 uL, connotation rejection liquid hope against hope be real singled out up. The chow down attitude (the most position), is the upper limit volume of the pipette (for instance: 10 uL, 200 uL, or else 1000 uL, depending never-endingly the pipette). Calibrating the shelve tip opinion is chief intended for assembly definite the tips are driven out right in imitation of both transfer, though the perception is not mixed up featuring in the volume calibration.

Calibration of volumetric glassware consists of the following services:

The instrument is inspected visually pro defects trendy numbering, graduating, otherwise some apparent substantial defects.

The instrument is examined less than a polariscope en route for befall assured it is emancipated as of strains appearing in the beaker (usually starting the manufacturing process), to the same degree grave strains possibly will assume the integrity of the instrument appearing in the extensive term.M

Now a pipette otherwise further manufactured article by way of a precision bore, the weary motivation come to pass examined in exaggeration representing misdeed participating in nature before a few supplementary defect which would render the instrument unacceptable meant for certification.

But the instrument does not hold a sequential number, a stoneware label serialization numeral determination befall affixed.

The instrument is after that painstakingly cleaned, by means of solvents otherwise detergents because appropriate, next rinsed plus alcohol, it follows that by water, in addition to in conclusion and distilled water, then from top to bottom dried by means of certain airing with filtered air.

The instrument is in that case hardened for every ICL method 03, based at ASTM E-542, in the function of apt designed for the volumes on the way to befall limited otherwise delivered. Calibration is performed in hydrostatic weighing by means of distilled water, corrected in support of temperature, atmospheric stress moreover manner bouyancy. Readings on each one try end (as appropriate) are resolved below enlargement headed for one-tenth of the negligible level apportionment furthermore are precisely noted.

NABL ACCREDITED CALIBRATION/TESTING LABORATORY (AS PER ISO/IEC 17025:2005)

Our lab is well equipped, meeting National/ International Standards and accredited by NABL (National Accreditation Board for Testing & Calibration Laboratories) under Dept. of Science & Technology (DST), Govt. of India, New Delhi.

What Is Included

We have included 4 business. These business are below:

Transformer Testing Laboratory

We have NABL Accredited & BIS Recognized Power & Distribution Transformer Test Lab. Transformer Tests – As per Is: 1180/ IS: 2026. are Routine Test, Type Test, special Test, Other Test, Lightning Impulse Test on Insulator, Bushing, Current Transformer and Potential Transformer.

CI Proficiency Training Provider

The CIPTPL provides dedicated and quality Proficiency Testing Services to its participants. CIPTPL has set up management systems based on ISO/IEC 17043 for this purpose and continually improves upon the effectiveness of the system based on the experience gained in the process.

World Precious Calibration Laboratory

C and I Calibrations Private Limited was established in 1995.C&I is having State of the art NABL Calibration Accredited Laboratories at Kota and Jaipur. We are also having facilities for Mechanical Calibration, Thermal Calibration, Fluid Flow Calibration & Electro-technical calibration.

Building Material Testing Laboratory

C & I Systems is a NABL Accredited Civil Testing Laboratory as per ISO/IEC 17025:2005. Samples are tested here- Soil, Rock, Stone, Water, Steel, Aggregate, Cement, Concrete, CC Cube, Tiles, Brick, Bitumen, Sand, Interlocking Block, Mix Design, Bitumen Mix Design, Chemical and Mechanical Testing Both. etc.

Why Choose This Service

There are no secrets to success. It is the result of preparation, hard work, and learning from failure. So Great things in business are never done by one person. They’re done by a team of people.

Happiness does not come from doing easy work but from the afterglow of satisfaction that comes after the achievement of a difficult task that demanded our best.

“A customer is the most important visitor on our premises. He is not dependent on us. We are dependent on him. He is not an interruption in our work. He is the purpose of it. He is not an outsider in our business. He is part of it. We are not doing him a favor by serving him. He is doing us a favor by giving us an opportunity to do so.”