M/s C and I Calibrations Pvt. Ltd, is a NABL Accredited Calibration and Testing Laboratory. The prime aim of this unit is to provide solution in managing calibration and Testing looking to the needs of the various industries in this region govt. organizations and private sectors.

  • H- 13(d), Electronics Complex, Road No.1, IPIA, Kota-324005 (Raj.) India
  • 91-744-2434994/ 91-8003095306
  • civiltestinglab@gmail.com
  • Mon - Sat: 9:00 am- 6.00 pm

Building Material Testing (Mechanical Testing) :

SOIL (IS: 2720) –

Grain Size, L.L, PL., Water Content, Specific Gravity, Shrinkage Limit, Compaction test by (Light & Heavy Method), FSI, Swelling Pressure, CBR, Direct Shear, Consolidation, Permeability and CNS Mix Design.

Soil at site :

  • Plate Load Test, Cyclic Plate Load Test.
  • Standard Penetration Test, Field CBR Test.

IN Situ Density:

  • Sand replacement
  • Core Cutter Method

ROCK (IS: 9143 & IS: 13030) –

Unconfined Compressive Strength, Relative Density, Water Content, Point Load Index

Cement- OPC, PPC, Flyash (IS: 4031) –

Physical Testing- Consistency, IST, FST, Compressive Strength, Fineness by Dry and By Blain Air Method, Specific Gravity, Soundness by Autoclave & Le-Chatelier Method.

Aggregate (IS: 516) –

Coarse Aggregate- Sieve Analysis, Bulk Density, Los Angles, Abrasion Value, Impact Value, Crushing Value, Water Absorption, Specific Gravity, Flakiness Index, Elongation Index, 10% Fine Value,Soundness with Na2SO4/ MgSO4, Stripping Value, Sand Equivalent Value, Deleterious Materials.

Fine Aggregate- Sieve Analysis, Bulk Density, Los Angles, Abrasion Value, Impact Value, Crushing Value, Water Absorption, Specific Gravity, Flakiness Index, Elongation Index, 10% Fine Value,Soundness with Na2SO4/ MgSO4, Stripping Value, Sand Equivalent Value, Deleterious Materials.

Bricks (IS: 3425) –

Compressive Strength, Water Absorption, Efflorence, Dimension, Bulk Density

PAVER BLOCK (IS: 15628) –

Compressive Strength, Water Absorption

C.C. TILE (IS: 1237 & IS: 10646) –

Flexural Strength Water Absorption

C. C. Cube (IS: 516) –

Compressive Strength of Concrete Cube and Mortar Cubes.

Concrete Core (Solid & Hollow) (IS: 2185) –

  • Water Absorption, Block Density, Compressive Strength.

Concrete Core (IS: 516) –

  • Sampling at Site
  • Testing Compressive Strength, Density, Water Absorption.

Mix Design (IS: 10262 & SP-23) –

  • Mix Design of Cement Concrete
  • Slump Test, Mix Design with Accelerated Curing.

BITUMEN &BITUMEN EMULSION (IS: 1201 TO 1220) –

Softening Point, Flash Point, Penetration Test, Ductility Test, Marshall Stability, Solubility in Trichloroethylene, Loss on Heating Elastic Recovery at 150C, Specific Gravity, Thin Film Oven Test.

Residue on 600 micron, Viscosity by Saybolt Furol Viscometer at 25 & 50 °C, Coagulation of Emulsion, Storage Stability, Coating Ability and Water Resistance, Miscibility with Water, Stability with Mixing with Cement, Tests on Residue.

Steel TMT Bar (IS: 1786 & IS: 2062 & IS: 1608) –

1.) Reinforcement Bar (IS: 1786)-

  • Ultimate Tensile Strength
  • Yield Stress
  • % Elongation
  • Nominal Mass/ Mass per meter
  • Bend and Rebend Test

2.) Structural Steel (Plates, Round & Flate Angle Channels, Beams, T & I Section, Pipes, Bolts etc) Steel Casting (IS: 2062)-

  • Ultimate Tensile Strength
  • Yield Stress
  • % Elongation
  • Nominal Mass/ Mass per meter
  • Bend and Rebend Test

3.) Flattening Test of Tubes & Pipes- Flattening Test and Flaring Test

4.) Welded Plates & Pipes-

  • Tensile Test (Transverse/ All Weld Tensile)
  • Guide Bend Test
  • Macro & Micro Test
  • Fracture Test
  • Nick Break Test

NABL ACCREDITED CALIBRATION/TESTING LABORATORY (AS PER ISO/IEC 17025:2005)

Our lab is well equipped, meeting National/ International Standards and accredited by NABL (National Accreditation Board for Testing & Calibration Laboratories) under Dept. of Science & Technology (DST), Govt. of India, New Delhi.

What Is Included

We have included 4 business. These business are below:

Transformer Testing Laboratory

We have NABL Accredited & BIS Recognized Power & Distribution Transformer Test Lab. Transformer Tests – As per Is: 1180/ IS: 2026. are Routine Test, Type Test, special Test, Other Test, Lightning Impulse Test on Insulator, Bushing, Current Transformer and Potential Transformer.

CI Proficiency Training Provider

The CIPTPL provides dedicated and quality Proficiency Testing Services to its participants. CIPTPL has set up management systems based on ISO/IEC 17043 for this purpose and continually improves upon the effectiveness of the system based on the experience gained in the process.

World Precious Calibration Laboratory

C and I Calibrations Private Limited was established in 1995.C&I is having State of the art NABL Calibration Accredited Laboratories at Kota and Jaipur. We are also having facilities for Mechanical Calibration, Thermal Calibration, Fluid Flow Calibration & Electro-technical calibration.

Building Material Testing Laboratory

C & I Systems is a NABL Accredited Civil Testing Laboratory as per ISO/IEC 17025:2005. Samples are tested here- Soil, Rock, Stone, Water, Steel, Aggregate, Cement, Concrete, CC Cube, Tiles, Brick, Bitumen, Sand, Interlocking Block, Mix Design, Bitumen Mix Design, Chemical and Mechanical Testing Both. etc.

Why Choose This Service

There are no secrets to success. It is the result of preparation, hard work, and learning from failure. So Great things in business are never done by one person. They’re done by a team of people.

Happiness does not come from doing easy work but from the afterglow of satisfaction that comes after the achievement of a difficult task that demanded our best.

“A customer is the most important visitor on our premises. He is not dependent on us. We are dependent on him. He is not an interruption in our work. He is the purpose of it. He is not an outsider in our business. He is part of it. We are not doing him a favor by serving him. He is doing us a favor by giving us an opportunity to do so.”