M/s C and I Calibrations Pvt. Ltd, is a NABL Accredited Calibration and Testing Laboratory. The prime aim of this unit is to provide solution in managing calibration and Testing looking to the needs of the various industries in this region govt. organizations and private sectors.

  • J-448, Sitapura Industrial Area, Jaipur-302022 (Raj.) India
  • 91-141-2771849 / 91-8003095302
  • infocicpl@gmail.com
  • Mon - Sat: 9:00 am - 6:00 pm

Separate– Source Voltage Withstand Test :-

The test is successful if no breakdown in the dielectric of the insulation occurs during test. During the Separate source AC withstand voltage test, the frequency of the test voltage should be equal to the transformer’s rated frequency or should be not less than 80% of this frequency.

To confirm the insulation strength of the transformer line and neutral connection terminals and the connected windings to the earthed parts and other windings.

This test checks the insulation property between primary to earth, secondary to earth and between primary and secondary.

HV High Voltage Test :- LV Winding connected together and earthed. HV Winding connected together and given 28 KV (for 11 KV Transformer) for 1 Minute.

LV High Voltage Test :- HV Winding connected together and given 3 KV for 1 Minute.

Equipment Used :- High Voltage Tester (100 KV & 3 KV)

Our Power and Distribution Transformer Test Laboratory is NABL Accredited & BIS Recognized Laboratory.

Our lab is well equipped, meeting National/ International Standards and accredited by NABL (National Accreditation Board for Testing & Calibration Laboratories) under Dept. of Science & Technology (DST), Govt. of India, New Delhi.

What Is Included

We have included 4 business. These business are below:

Transformer Testing Laboratory

We have NABL Accredited & BIS Recognized Power & Distribution Transformer Test Lab. Transformer Tests – As per Is: 1180/ IS: 2026. are Routine Test, Type Test, special Test, Other Test, Lightning Impulse Test on Insulator, Bushing, Current Transformer and Potential Transformer.

CI Proficiency Training Provider

The CIPTPL provides dedicated and quality Proficiency Testing Services to its participants. CIPTPL has set up management systems based on ISO/IEC 17043 for this purpose and continually improves upon the effectiveness of the system based on the experience gained in the process.

World Precious Calibration Laboratory

C and I Calibrations Private Limited was established in 1995.C&I is having State of the art NABL Calibration Accredited Laboratories at Kota and Jaipur. We are also having facilities for Mechanical Calibration, Thermal Calibration, Fluid Flow Calibration & Electro-technical calibration.

Building Material Testing Laboratory

C & I Systems is a NABL Accredited Civil Testing Laboratory as per ISO/IEC 17025:2005. Samples are tested here- Soil, Rock, Stone, Water, Steel, Aggregate, Cement, Concrete, CC Cube, Tiles, Brick, Bitumen, Sand, Interlocking Block, Mix Design, Bitumen Mix Design, Chemical and Mechanical Testing Both. etc.

Why Choose This Service

There are no secrets to success. It is the result of preparation, hard work, and learning from failure. So Great things in business are never done by one person. They’re done by a team of people.

Happiness does not come from doing easy work but from the afterglow of satisfaction that comes after the achievement of a difficult task that demanded our best.

“A customer is the most important visitor on our premises. He is not dependent on us. We are dependent on him. He is not an interruption in our work. He is the purpose of it. He is not an outsider in our business. He is part of it. We are not doing him a favor by serving him. He is doing us a favor by giving us an opportunity to do so.”